These are custom small u bolts we supplied to our customer at approximately 16,000 pcs. The 1/4-20 thread was rolled per customer specifications and the zinc plating was done to QQ-Z-325. Width between the legs is set at 1.060 inches before the extended rolled thread, outside length at 1.84 inches, and thread length at .62 […]

These are custom rush order u bolts made using 304 stainless steel material.  Our customer was in a huge rush and we had to get these custom square u bolts made within 2-3 days of order and shipped via next day air.  50 pieces were produced on time as promised and shipped with material certs […]

These are custom A108 steel u bolts domestically manufactured with rolled thread. The picture shows the initial sample pieces made in plain ASTM A108 steel material for testing purposes, with the production order consisting of zinc plated version of the same part. The lead time for these custom round u bolts is slightly longer than […]

These are the more unusual u bolts we have supplied over the years – they are custom fully threaded u bolts. Typically only a partial length of each leg is threaded, whether cut threads or rolled, but in this case our customer specifically requested a fully threaded version. 1,000 pieces were run through a domestic […]

These are custom 316 stainless steel round u-bolts we supplied to our customer at a bit over 100 pieces. Lead time was at about 6-7 business days from order and material certs with certificate of conformance were provided with the parts as well per our customer’s request. The inside width is 2-5/8″, inside length is […]

These are custom thin U bolts made domestically using 1018 plain steel material at approximately 600 pcs. Lead time for production was 6 business days and each custom round u bolt was supplied with a pair of hex nuts, flat washers, and split lock washers. Material certs and certificate of conformance was provided with the […]

These are custom USA galvanized u bolts manufactured domestically using US melt steel. Our customer ordered this 1/2 X 5-1/4″ together with 5 other size variations. Rush lead time was approximately 8-10 business days due to the galvanizing process. This specific version has an inside width of 3-5/8″, 1/2-13 thread of approximately 1-1/2 inches on […]

These are custom zinc plated u-bolts in A36 steel material with commercial zinc and clear finish. Domestic production was run for 200 pieces on a rush basis with lead time at 7-10 business days due to the zinc plating process time required. 3/8 diameter rod was used with 2-1/2 inches of coarse thread on each […]

These are custom zinc plated u bolts we supplied to our customer at 150 sets that included 2 hex nuts per u bolt and a flat plate measuring 1/8 X 2 X 3-1/4 inches.  The lead time without any rush service was at 2 weeks from order confirmation.  Material certs were provided with the parts […]

These are custom grade 8 u bolts made using 4140 SAE grade 8 steel material with rolled 1/2-13 thread. The hardness was recorded at 36 HRC and tensile strength at 162 KSI. 5 pieces were made for our customer for testing purposes prior to a larger commitment. The inside width was set at 4.76″, inside […]